Water Pumps and Powerheads

 

Water circulation in the aquarium and throughout the filtration system is an important aspect of creating a natural aquatic environment.

Coralife provides a variety of products to meet your needs from in tank circulation pumps to external high pressure pumps.

Product Series

Wavemaker pumps with DC controller allow for the ability to create customized water patterns similar to reef currents and river flows found in nature.

Four operational modes:

Continuous Flow Mode: Adjust either pump to flow from 40-100% of maximum power to eliminate specific dead zones or create more current for coral health.

Tidal Mode: The two pumps are positioned at opposite ends of the aquarium. Pump A runs at maximum flow while Pump B runs at low flow for 12-hour cycle. The two pumps then switch speeds after 12 hours so Pump A runs at low flow, while Pump B runs at maximum flow, simulating a natural tidal ocean current.

Turbulence Mode: Both pumps begin at the lowest flow settings and increases up to maximum flow, then power off for five seconds before repeating. The run time to get from the lowest to maximum flow can be adjusted from 10-60 seconds.

Continuous/Turbulence Mode: Pump A runs continuously from 40-100% of maximum power while Pump B is in Turbulence Mode.

  • Eliminates dead zones
  • Improves water quality and coral health
  • For use in salt and freshwater environments
  • Available in 2600 and 5800 GPH flow rates
  • Limited Lifetime Warranty

View products and specifications

Product Photos

  • DC Wavemaker 2600 Pumps
  • DC Wavemaker 2600 Controller
  • DC Wavemaker 2600 Components
  • DC Wavemaker 5800 Pumps
  • DC Wavemaker 5800 Controller
  • DC Wavemaker 5800 Components
  • DC Wavemaker In-Tank Shot

Coralife circulation pumps simulate natural reef and river currents by continuously circulating the water in your aquarium. Three sizes with lab certified flow ratings make it easy to find the right fit for your application. Each pump includes a super strength suction cup and quick release mounting bracket for easy installation, removal and repositioning. A pivot bracket is built in for maximum flexibility in positioning the pump and directing water flow in the desired area.

  • Lab certified flow rating
  • Energy saving motor
  • Titanium plated stainless steel impeller shaft
  • Suction cup mounting bracket
  • Available in three sizes 750, 1300, 2900 gallons per hour

View products and specifications

Product Photos

  • Circulation Pumps
  • Circulation Pumps
  • Circulation Pumps

Turbo Sea High Pressure Pumps are designed for use with canister filters and applications where high head pressure is needed.

  • Quiet magnetic-drive pump system
  • Durable polypropylene impeller and housing
  • Ceramic impeller shaft
  • Powerful cooling fan
  • Pre-drilled mounting brackets

View products and specifications

Product Photos

  • Turbo Sea 580
  • Turbo Sea 790
  • Turbo Sea 1100
  • Turbo Sea 1740

Turbo Sea High Pressure Pumps are designed for use with canister filters and applications where high head pressure is needed.  Each Turbo Sea High Pressure Pump is designed with the following features:

  • Quiet magnetic-drive pump system
  • Durable polypropylene impeller and housing
  • Ceramic impeller shaft
  • Powerful cooling fan
  • Pre-drilled mounting brackets

View products and specifications

Product Photos

  • Turbo Sea 1270
  • Turbo Sea 1090